Show Posts
|
|
Pages: [1] 2
|
|
1
|
General IPv6 Topics / IPv6 on Linux & BSD & Mac / IPv6 routing with Leopard?
|
on: May 07, 2009, 07:29:01 pm
|
|
Hi,
I try to find a proper how to about how to enable one Leopard machine as IPv6 router. But so far I couldn't find something. I was looking for a how to that allows me to give local machines also public IPv6 addresses. Since I got an subnet, why not using it?
cu Hannemaf
|
|
|
|
|
2
|
IPv6 Certification Program Topics / Suggest a Test! / Re: Providing DNSSEC ? aka pushing other technologies.
|
on: April 23, 2009, 07:19:52 am
|
|
It doesn't right, so does Apache, Postfix or even Bind ;-)
Even getting a ping result from a IPv6 server isn't that hard.
I was thinking about DNSSEC to spread it in the wild a bit more. If you check out the Sage (end even users with lower certificates) most of them are doing everything to get more points. So why not using this obsession for points into something useful?
I mean what does the net need? More peers for P2P networks? Maybe, but there are to many legal risks connected with it. So some people might prefer not to set up one. TOR exit nodes? Definitely, but that is the same problem as with P2P peers. So what else could be pushed to let the community benefit? Maybe Public uncensored DNS servers, but that would create high traffic load (and so it will cost a lot of money for some). In addition the individual won't profit from that.
So back to DNSSEC. If it could be used to get more points there would be a group of more than 100 (depending on for which rank that would be relevant) people who could use it. And therefore a little push for this technology. It could be also an additional "submit a DNSSEC ready DNS server request every week" or so.... but that would be more than I had in mind.
|
|
|
|
|
5
|
IPv6 Certification Program Topics / Suggest a Test! / Checking if user is able to set up a router?
|
on: April 22, 2009, 06:51:00 pm
|
hi don't know if it is part of a later rank.... but since checking AAAA records and web pages was already part of the game... what's about the idea to let the user create a special host behind a router? it shouldn't be to hard to create a virtual machine with a specific hostname and then let the user confugurate his own machine to forward a IPv6 request to that host. maybe that is a bit confusing..... ok here a faked traceroute: routingcheck.tunnel.tserv6.fra1.ipv6.he.net: # traceroute6 ipv6.he.net
traceroute to ipv6.he.net (2001:470:0:64::2), 30 hops max, 40 byte packets 1 userhost.tserv6.fra1.ipv6.he.net (2001:470::2) 6.341 ms 7.621 ms 6.512 ms 2 gige-g2-4.core1.fra1.he.net (2001:470:0:69::1) 10.937 ms 5.086 ms 15.395 ms 3 10gigabitethernet1-4.core1.ams1.he.net (2001:470:0:47::1) 12.513 ms 10.336 ms 10.244 ms 4 10gigabitethernet1-4.core1.lon1.he.net (2001:470:0:3f::1) 20.604 ms 20.536 ms 17.315 ms 5 10gigabitethernet2-3.core1.nyc4.he.net (2001:470:0:3e::1) 87.628 ms 86.505 ms 89.052 ms 6 10gigabitethernet3-1.core1.sjc2.he.net (2001:470:0:33::1) 166.804 ms 165.291 ms 166.506 ms 7 10gigabitethernet1-1.core1.fmt1.he.net (2001:470:0:2f::1) 178.892 ms 170.906 ms 171.414 ms 8 ipv6.he.net (2001:470:0:64::2) 166.388 ms 166.056 ms 165.757 ms
but insted of submitting this, the tunnelbroker.net server would try to reach the machine with the name "routingcheck.tunnel.tserv6.fra1.ipv6.he.net". hmm maybe I should sleep not write... it was a long day. good night Hannemaf
|
|
|
|
|
10
|
IPv6 Certification Program Topics / General Discussion / Changing the domain for the Guru test?
|
on: April 22, 2009, 10:32:11 am
|
|
Hi,
It looks like that I was a bit unalerted, when I read that I should be careful which Domain/IP I use.
While I did all this I was in the process of registering a new domain and now I want to change to that one, especially because of the fact that I now should do all the Guru test's with 2001:5c0:1400:a::51. Which is now impossible for me.
So is there a way to change the settings to use another domain?
cu Hannemaf
|
|
|
|
|
13
|
IPv6 Certification Program Topics / General Discussion / Re: Print out version?
|
on: April 21, 2009, 06:11:25 pm
|
I know that there are some legal issues involved in this stuff but maybe this shows better what I think of. The certificate would have 2 dynamic parts similar to the existing buttons, but instead of the user name the real name will be shown and the rank. Below that the text of what have to be done to reach that rank and the number of points. I guess a mentioning of the maximum number of points would be a bit useless. There are to many ways to get more points without (I guess) reaching a new rank. But points are always good to show sooooo... lets say that's the fun part :-) And below that is the fine print. There is a place where the user name and the certificate ID could be placed.  Just click on that picture to get a bigger version. This is only a version to clarify what I meant and clearly nothing that shows how it should be done. For example the fonts should be different to be better readable and my colour combination is horrible. cu Hannemaf
|
|
|
|
|
15
|
IPv6 Certification Program Topics / General Discussion / Re: Print out version?
|
on: April 21, 2009, 04:13:24 pm
|
|
Right, the option to display the real personal details would be important as well.
Years ago I loved to have the Seti@Home certificates on the wall. Even if it isn't an official accredited certificate, the people are right if they say they had to do something for it. Sure, there are ways for cheating, but you could add an information about the domain which was used for the tests. If you put a ID number on the certificate, you would offer a way to validate the certificate.
It still wouldn't be the ultimate way to prove something, but at least a bit.
I understand that this is for fun, but as I wrote already. Everybody who got more than the NewB points did something to reach a goal. But I still don't like the idea that people could pretend, that they got a Guru rank and have this certificate on there wall, but don't have a clue what IPv6 is.
|
|
|
|
|