Windows 7 Tunnel Help

[Copyright1]

Hi,

I setup a tunnel and used the commands provided for Windows 7. Everything went through completely. However, I still can't connect to IPV6 pages.

My ipconfig/all shows that it's not running:

Code:

Windows IP Configuration

   Host Name . . . . . . . . . . . . : RAWR
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No

Ethernet adapter Local Area Connection* 9:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Anchorfree HSS Adapter
   Physical Address. . . . . . . . . : 00-FF-89-BE-C4-E9
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Wireless LAN adapter Wireless Network Connection:

   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : blah
   Physical Address. . . . . . . . . : blah
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::79c0:a6b8:3fe3:367c%blah(Preferred)
   IPv4 Address. . . . . . . . . . . : 192.168.1.blah(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Sunday, May 23, 2010 2:12:51 AM
   Lease Expires . . . . . . . . . . : Monday, May 24, 2010 2:14:58 AM
   Default Gateway . . . . . . . . . : 192.168.1.1
   DHCP Server . . . . . . . . . . . : 192.168.1.1
   DHCPv6 IAID . . . . . . . . . . . : 2181130blah
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-13-53-72-22-00-22-19-ED-90-blah

   DNS Servers . . . . . . . . . . . : 192.168.1.1
   NetBIOS over Tcpip. . . . . . . . : Enabled

Ethernet adapter Local Area Connection:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . : blah
   Description . . . . . . . . . . . : blah
   Physical Address. . . . . . . . . : 00-22-19-ED-blah
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter isatap.{7338B344-1EE8-4368-BEDD-1D919D04885D}:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

Tunnel adapter IP6Tunnel:

   Media State . . . . . . . . . . . : Media disconnected
   Connection-specific DNS Suffix  . :
   Description . . . . . . . . . . . : Microsoft Direct Point-to-point Adapater
   Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
   DHCP Enabled. . . . . . . . . . . : No
   Autoconfiguration Enabled . . . . : Yes

What do I do?

[Capsino]

I have the same problem (Windows7 64). My question: How can I find out whether my router supports protocol 41?

I successfully installed a pptp connection but still did not get access to ipv6 pages. What is the problem??  

[cholzhauer]

You should open your own thread.

But

How can I find out whether my router supports protocol 41?

I have not come across a foolproof way.  Normally you have to put the host in the DMZ or similar (or if you have an enterprise type firewall, forward all ip traffic).

We'll need more details, such as your assigned ranges, output of your routing table, and out put of ipconfig /all