Hurricane Electric's IPv6 Tunnel Broker Forums
May 25, 2013, 09:13:18 pm *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to Hurricane Electric's Tunnelbroker.net forums!
 
   Home   Help Search Login Register  
Hurricane Electric's IPv6 Tunnel Broker Forums > General IPv6 Topics > IPv6 on Linux & BSD & Mac > radvd error
Pages: [1]
« previous next »
  Print  
Author Topic: radvd error  (Read 1855 times)
woosingwoo
Newbie
*
Posts: 25


View Profile
« on: February 14, 2011, 01:24:23 pm »
Hi,

try to start the radvd service with the following error:
"radvd: no linklocal address configured for ppp0"

Any ideas on how to fix the issues?

Thanks,
Woo
Logged
cholzhauer
Hero Member
*****
Posts: 2082


View Profile
« Reply #1 on: February 14, 2011, 01:44:59 pm »
Why are you trying to run RADVD on PPP0?
Logged
woosingwoo
Newbie
*
Posts: 25


View Profile
« Reply #2 on: February 14, 2011, 03:12:18 pm »
try to test a CPE (home router) with ipv6 pppoe.
Logged
antillie
Full Member
***
Posts: 103



View Profile
« Reply #3 on: February 14, 2011, 03:18:57 pm »
Radvd is used to advertise yourself as an IPv6 router on the local LAN. As such you should only need to run radvd on your LAN facing interface and not your WAN interface.
Logged
woosingwoo
Newbie
*
Posts: 25


View Profile
« Reply #4 on: February 14, 2011, 04:45:38 pm »
ppp0 is part of my LAN interface.
Logged
jimb
Hero Member
*****
Posts: 804


^^^ Warped picture


View Profile
« Reply #5 on: February 14, 2011, 04:48:07 pm »
Yes, if you're using PPPoE it's going through the LAN interface, but you don't want RADVD to announce your LAN /64 through the ppp interface, but through the ethernet interface (eth0), where you should assign an address out of your LAN /64.
Logged
woosingwoo
Newbie
*
Posts: 25


View Profile
« Reply #6 on: February 15, 2011, 10:10:19 am »
Thanks all, after putting the localhost address in the server option it is working fine now.

Thanks,
Woo
Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!