Hi all,
Sorry for the newbie question. I have VPS (on vmware host). I have IPv4 connection on the eth0 interface. I want to know if it is possible to get working ipv6 from different brokers? Now, I have following tunnels:
# ip tunnel
sit0: ipv6/ip remote any local any ttl 64 nopmtudisc
nn-ipv6: ipv6/ip remote 210.86.228.4 local 195.117.191.110 ttl 255
lewy-ipv6: ipv6/ip remote 95.211.30.223 local 195.117.191.110 ttl 255
he-ipv6: ipv6/ip remote 216.66.84.46 local 195.117.191.110 ttl 255
# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 16436 qdisc noqueue state UNKNOWN
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
link/ether 00:50:56:85:00:e7 brd ff:ff:ff:ff:ff:ff
3: sit0: <NOARP> mtu 1480 qdisc noqueue state DOWN
link/sit 0.0.0.0 brd 0.0.0.0
6: nn-ipv6: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN
link/sit 195.117.191.110 peer 210.86.228.4
8: lewy-ipv6: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN
link/sit 195.117.191.110 peer 95.211.30.223
37: he-ipv6: <POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1480 qdisc noqueue state UNKNOWN
link/sit 195.117.191.110 peer 216.66.84.46
91: sixxs: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1280 qdisc pfifo_fast state UNKNOWN qlen 500
Only tunnel from HE is now working. What is interesting is at night I could ping ipv6 of sixxs, I made no changes and now (10-12hrs later) there is no reply for ping packets. "tcpdump -Unvvi sixxs" doesn't capture any packet. Also, response for pings (he-ipv6) was for the second time. If someone want to help me, I can paste more information. Thanks in advance.
Kind regards, Matthew
