Server IPv6 Addresses?

Nick Pais

Newbie

Posts: 7

Server IPv6 Addresses?

« on: December 09, 2011, 08:18:21 am »

Hello everyone, I have a quick (I suppose), easy and possibly stupid question: On the tunnelservers (or in HENET's network in general), how do you set up to add all those tunnel "gateways" (For example: Server IPv6 Address:2001:470:1f10:a10::1/64) to the servers? I doubt they are added one by one, instead the server has a /48 allocated to it (or bigger). I've always had this uncertainty and want to have it cleared up for me. Thanks!


	Logged

broquea

Senior Network Engineer, SEVEN Networks (AS19733)
Hero Member

Posts: 1378

Re: Server IPv6 Addresses?

« Reply #1 on: December 09, 2011, 09:13:15 am »

Each tunnel has its own interface. So yes, each ::1/64 is configured as the interface is configured, one by one. The /48 is just an allocation pool that the tunnels get their /64s out of.


	Logged

Nick Pais

Newbie

Posts: 7

Re: Server IPv6 Addresses?

« Reply #2 on: December 09, 2011, 09:16:30 am »

Quote from: broquea on December 09, 2011, 09:13:15 am

Each tunnel has its own interface. So yes, each ::1/64 is configured as the interface is configured, one by one. The /48 is just an allocation pool that the tunnels get their /64s out of.

Ah, ok. Thanks for clearing that up for me!


	Logged

kasperd

Founder, Netiter ApS
Hero Member

Posts: 709

Re: Server IPv6 Addresses?

« Reply #3 on: December 09, 2011, 11:01:59 am »

I'm curious how large chunks of addresses you assign to a tunnel server each time. Since it is possible for users to request a /48, I assume you don't assign that long prefixes to the tunnel servers, as you'd have to allocate a new /48 to the tunnel server each time a user requests a /48.


	Logged

antillie

Full Member

Posts: 103

Re: Server IPv6 Addresses?

« Reply #4 on: December 09, 2011, 01:35:57 pm »

Just a wild guess but I would imagine that they assign /32's to the tunnel servers as needed. Slice a /32 into 65,536 /48's, cut a few of those up into 65,536 /64's each and you have plenty of /64 and /48 blocks for use on tunnels and as routed blocks on each tunnel server.


	Logged

broquea

Senior Network Engineer, SEVEN Networks (AS19733)
Hero Member

Posts: 1378

Re: Server IPv6 Addresses?

« Reply #5 on: December 09, 2011, 01:53:05 pm »

2001:470::/32 can only have 1 /32

Although we do have a /24 now, but that will be put to other uses Cheesy

We'll leave this unanswered as to our specifics, but feel free to guess away!


	Logged

kasperd

Founder, Netiter ApS
Hero Member

Posts: 709

Re: Server IPv6 Addresses?

« Reply #6 on: December 09, 2011, 03:10:34 pm »

Quote from: broquea on December 09, 2011, 01:53:05 pm

Although we do have a /24 now, but that will be put to other uses Cheesy

I thought such short prefixes where only handed out temporarily for 6rd deployments and similar transition mechanisms.

Quote from: broquea on December 09, 2011, 01:53:05 pm

We'll leave this unanswered as to our specifics, but feel free to guess away!

A quick traceroute reveals that at least 2001:470:28::/48 which is used for /64s on sto1 is routed only as a /48. Oddly the routed /64s and the tunnel endpoints are from a different /48. The two /48s are adjacent, but could not be aggregated into a /47.

So 2001:470:27::/48 and 2001:470:28::/48 are both routed to the same tunnel server, but 2001:470:26::/48 and 2001:470:29::/48 are elsewhere.

I cannot figure out what the reasoning would have been behind this.


	Logged

broquea

Senior Network Engineer, SEVEN Networks (AS19733)
Hero Member

Posts: 1378

Re: Server IPv6 Addresses?

« Reply #7 on: December 09, 2011, 03:14:50 pm »

Quote from: kasperd on December 09, 2011, 03:10:34 pm

I thought such short prefixes where only handed out temporarily for 6rd deployments and similar transition mechanisms.

Nothing temporary about this allocation


	Logged

Pages: [1]

« previous next »