Hurricane Electric's IPv6 Tunnel Broker Forums
May 25, 2013, 04:29:33 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to Hurricane Electric's Tunnelbroker.net forums!
 
   Home   Help Search Login Register  
Pages: [1]
  Print  
Author Topic: Supermicro IPMI + IPv6  (Read 3658 times)
broquea
Senior Network Engineer, SEVEN Networks (AS19733)
Hero Member
*****
Posts: 1379



View Profile WWW
« on: January 24, 2012, 12:41:29 pm »

Quick writeup I did for configuring Supermicro servers with ATEN IPMI chipsets to use IPv6. http://ipvsix.me/?p=159
Logged
ka9q
Newbie
*
Posts: 1


View Profile
« Reply #1 on: July 08, 2012, 02:55:55 pm »

With thanks to the people on this list, I just got 6rd going over Uverse down here in San Diego. I had noticed 6to4 wasn't working, went to investigate and discovered this discussion. Wonders never cease.

My traceroute path to the relay address 12.83.49.81 is as follows:

 1. uverse.local                                                           
 2. 99-71-136-2.lightspeed.sndgca.sbcglobal.net 
 3. 75.20.78.24
 4. 75.20.78.48
 5. 75.20.78.131
 6. 12.83.70.137
 7. 12.123.132.213
 8. 12.83.49.81

Delays were a remarkably flat 20-25 ms all the way up; the 20 ms is for the first IP entity on the other side of my VDSL2 link. I have never learned exactly where that is; is it in the cabinet down the street or somewhere in AT&T's vast cloud? THe 25 ms is for hop 8, so there's very little additional latency over what I normally experience from Uverse.

BTW, tracerouting from a static IPv4 address over Uverse has *never* worked; apparently the brain-dead 2WIRE box blocks the returning ICMP error reports. But it does work when you use the NAT in the 2WIRE; go figure.


Logged
broquea
Senior Network Engineer, SEVEN Networks (AS19733)
Hero Member
*****
Posts: 1379



View Profile WWW
« Reply #2 on: July 08, 2012, 02:58:23 pm »

^ has what to do with supermicro and IPMI access over IPv6?
Logged
snarked
Hero Member
*****
Posts: 577



View Profile
« Reply #3 on: July 09, 2012, 09:47:22 am »

Holds true for their H8SCM-F motherboard too.
Logged
Pages: [1]
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!