tunnel not up on osx lion 10.7

Hi all,

I've set up a tunnel exactly as what was said in the "example configuration", but I can't ping6 the router neither myself on my machine.

ifconfig:

Code:

gif0: flags=8051<UP,POINTOPOINT,RUNNING,MULTICAST> mtu 1280
tunnel inet [myip_address] --> 72.52.104.74
inet6 fe80::ca2a:14ff:fe2b:a47b%gif0 prefixlen 64 scopeid 0x2
inet6 2001:470:1f04:23f::2 --> 2001:470:1f04:23f::1 prefixlen 128

netstat -r:

Code:

Internet6:
Destination Gateway Flags Netif Expire
default zq265-2.tunnel.tse UGSc gif0
localhost link#1 UHL lo0
zq265-2.tunnel.tse zq265-2-pt.tunnel. UH gif0
zq265-2-pt.tunnel. link#2 UHL lo0
fe80::%lo0 localhost UcI lo0
localhost link#1 UHLI lo0
fe80::%gif0 link#2 UCI gif0
fe80::ca2a:14ff:fe link#2 UHLI lo0
fe80::%en0 link#4 UCI en0
rivendell.local c8:2a:14:2b:a4:7b UHLI lo0
fe80::%vnic0 link#8 UCI vnic0

ping6 router

Code:

PING6(56=40+8+8 bytes) 2001:470:1f04:23f::2 --> 2001:470:1f04:23f::1
^C
--- 2001:470:1f04:23f::1 ping6 statistics ---
2 packets transmitted, 0 packets received, 100.0% packet loss

ping6 myself

Code:

PING6(56=40+8+8 bytes) 2001:470:1f04:23f::2 --> 2001:470:1f04:23f::2
^C
--- 2001:470:1f04:23f::2 ping6 statistics ---
5 packets transmitted, 0 packets received, 100.0% packet loss

I really have no clue what was wrong there, please help me out!

Regards,
zq265