Hurricane Electric's IPv6 Tunnel Broker Forums
May 25, 2013, 06:44:32 am *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Welcome to Hurricane Electric's Tunnelbroker.net forums!
 
   Home   Help Search Login Register  
Hurricane Electric's IPv6 Tunnel Broker Forums > Tunnelbroker.net Specific Topics > Questions & Answers > Error when setting endpoint
Pages: [1]
« previous next »
  Print  
Author Topic: Error when setting endpoint  (Read 6030 times)
pikecom
readonly_member
Newbie
*
Posts: 1


View Profile
« on: April 15, 2008, 08:54:43 pm »
I obtain the following error when setting endpoint. I need to know what host will be sending icmp requests to my endpoint to allow icmp requests from it.
Thanks


Error: Your IPv4 endpoint is unreachable or unstable. Please make sure ICMP is not blocked.


Fatal error: Cannot break/continue 1 level in /home/tb/public_html/includes/index_activate_tunnel.inc on line 52
Logged
broquea
Senior Network Engineer, SEVEN Networks (AS19733)
Hero Member
*****
Posts: 1379



View Profile WWW
« Reply #1 on: April 15, 2008, 09:42:28 pm »
Quote from: pikecom on April 15, 2008, 08:54:43 pm
I obtain the following error when setting endpoint. I need to know what host will be sending icmp requests to my endpoint to allow icmp requests from it.
Thanks


Error: Your IPv4 endpoint is unreachable or unstable. Please make sure ICMP is not blocked.


Fatal error: Cannot break/continue 1 level in /home/tb/public_html/includes/index_activate_tunnel.inc on line 52




tunnelbroker.net's ip is where the ping should originate.
Logged
joos13
Newbie
*
Posts: 2


View Profile
« Reply #2 on: November 13, 2008, 08:45:12 pm »
I am trying to set up a regular IPv6 tunnel.  When I enter my IP address (found from www.whatismyip.com), I get "Error: Your IPv4 endpoint is unreachable or unstable. Please make sure ICMP is not blocked."  ICMP echo requests were not blocked by my windows firewall, but I disabled my firewall anyways to see if the tunnel would succeed.  It did not work.  Any suggestions??  I don't have any experience with networking or IPv6.
Logged
broquea
Senior Network Engineer, SEVEN Networks (AS19733)
Hero Member
*****
Posts: 1379



View Profile WWW
« Reply #3 on: November 13, 2008, 08:57:19 pm »
Quote from: joos13 on November 13, 2008, 08:45:12 pm
I am trying to set up a regular IPv6 tunnel.  When I enter my IP address (found from www.whatismyip.com), I get "Error: Your IPv4 endpoint is unreachable or unstable. Please make sure ICMP is not blocked."  ICMP echo requests were not blocked by my windows firewall, but I disabled my firewall anyways to see if the tunnel would succeed.  It did not work.  Any suggestions??  I don't have any experience with networking or IPv6.

What is your IPv4 IP?
Logged
joos13
Newbie
*
Posts: 2


View Profile
« Reply #4 on: November 13, 2008, 09:12:21 pm »
My IP is 98.244.84.186.  Thanks for responding quickly Smiley

EDIT:

I created the tunnel, need to use 98.244.84.1 instead.  I ran the example configuration in the command line, though when I navigate to www.ipv6.org in IE, it says I am using an ipv4 IP address.  My firewall is off.  Any common mistakes I may be making?
« Last Edit: November 13, 2008, 10:20:10 pm by joos13 » Logged
Pages: [1]
  Print  
« previous next »
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.18 | SMF © 2013, Simple Machines Valid XHTML 1.0! Valid CSS!